毕业设计（论文）-泵体零件加工工艺及车φ98孔夹具设计（全套图纸）.doc

PAGE   PAGE III  PAGE I 毕业设计（论文） 题目 ??泵体零件的加工工艺夹具设计 摘 要 本设计专用夹具的设计泵体零件加工过程的基础上。主要加工部位是平面和孔加工。在一般情况下，确保比保证精密加工孔很容易。因此，设计遵循的原则是先加工面后加工孔表面。孔加工平面分明显的阶段性保证粗加工和加工精度加工孔。通过底面作一个良好的基础过程的基础。主要的流程安排是支持在定位孔过程第一个，然后进行平面和孔定位技术支持上加工孔。在随后的步骤中，除了被定位在平面和孔的加工工艺及其他孔单独过程。整个过程是一个组合的选择工具。专用夹具夹具的选择，有自锁机构，因此，对于大批量，更高的生产力，满足设计要求。 关键词：泵体类零件；工艺；夹具； 全套图纸，加153893706 ABSTRACT Foundation design of body parts processing process the design of special fixture. The main processing parts processing plane and holes. In general, ensure easy to guarantee precision machining holes than. Therefore, the design principle is first machined surface after machining hole surface. Periodic hole machining plane is obvious that rough machining and machining precision machining hole. A good foundation on the bottom surface of the process. The main process is supported in the positioning hole process first, and then the processing hole plane and the hole positioning technology support. In a subsequent step, in addition to processing technology are positioned in the plane and the other hole hole and separate process. The whole process is a combination of the selection tool. Special fixture fixture selection, a self-locking mechanism, therefore, for large quantities, higher productivity, meet the design requirements. Keywords: box type parts; technology; fixture;  PAGE III 目 录 TOC \o 1-3 \u  摘 要  PAGEREF _Toc404892224 \h II ABSTRACT  PAGEREF _Toc404892225 \h I 1 加工工艺规程设计  PAGEREF _Toc404892226 \h 4 1.1 零件的分析  PAGEREF _Toc404892227 \h 4 1.1.1 零件的作用  PAGEREF _Toc404892228 \h 4 1.1.2 零件的工艺分析  PAGEREF _Toc404892229 \h 4 1.2 泵体加工措施  PAGEREF _Toc404892230 \h 5 1.2.1 孔和平面的加工顺序  PAGEREF _Toc404892231 \h 5 1.2.2 孔系加工方案选择  PAGEREF _Toc404892232 \h 5 1.3 泵体加工定位基准的选择  PAGEREF _Toc404892233 \h 6 1.3.1 粗基准的选择  PAGEREF _Toc404892234 \h 6 1.3.2 精基准的选择  PAGEREF _Toc404892235 \h 6 1.4 泵体加工主要工序安排  PAGEREF _Toc404892236 \h 7 1.5 机械加工余量、工序及毛坯的确定  PAGEREF _Toc404892237 \h 9 1.6确