毕业设计（论文）-转向节加工工艺及镗φ25贯穿孔夹具设计（全套图纸）.doc

 PAGE 29 大学毕业设计 题目:转向节加工工艺规程与镗Φ25贯穿孔夹具设计 摘要 本文主要讲述汽车转向节加工工艺路线的设计，然后根据加工要求设计夹具。 汽车转向节主要加工部位是外圆表面和孔。加工处理时间多，加工成本高，精度很高的零件。过程中根据该表面的第一孔后的要求遵循的原则，孔明显地分为粗加工和精加工阶段，以确保精确性。参照被选择为基础原油参考的底表面，以下面的两个孔作为微细加工以确定处理技术所需的参数的方法。 在夹具设计零件，主要是基于需求分析应该是限制的自由度，然后根据不同的定位部件的表面特性选择不同的数量，然后分析限制是否应该选择以限制定位元件的自由度。机床夹具设计，机床夹具包括一些主要的夹具组成，夹具的类型，夹具的功能，工件在夹具上的位置，工件夹的夹紧，之后确定所述定位部件的最终形式也需要选择夹紧元件，是确定专用夹具的结构。 关键词：汽车转向节；加工工艺；工序；专用夹具 全套图纸，加153893706Abstract This paper mainly tells the design of the automobile steering knuckle processing technology route, and then designs the fixture according to the machining requirements. The main parts of the automobile steering knuckle are the outer circular surface and the hole. Processing time, high processing costs, high precision parts. According to the principle that the first hole of the surface is followed, the hole is clearly divided into rough machining and finishing stages to ensure accuracy. Referring to the bottom surface of the base crude oil reference, the two hole is used as a method to determine the parameters required for processing technology. In the design of fixture parts, mainly based on the needs analysis should limit the degrees of freedom and different quantities are chosen according to the surface characteristics of different parts of the positioning, then analysis whether the limit should be chosen to limit the positioning element degrees of freedom. Machine tool fixture design, fixture including some major fixture, fixture type, features of the fixture, the workpiece in the fixture position, workpiece clamping and then determine the final form of the positioning parts also need to select the clamping components, is to determine the structure of special fixture. Key words: automobile steering knuckle; processing technology; process; special fixture目 录 TOC \o 1-2 \h \z \u \t 标题 3,3   HYPERLINK \l _Toc424236722 摘要  PAGEREF _Toc424236722 \h II  HYPERLINK \l _Toc424236723 Abstract  PAGEREF _Toc424236723 \h III  HYPERLINK \l