A cement plant monitoring and analysis of occupational hazards.docVIP

 PAGE \* MERGEFORMAT 6 A cement plant monitoring and analysis of occupational hazards Of: Lian-Li Haiqing Ying Tao in the Autumn [Abstract] Objective: To understand and grasp the modern cement production enterprises Occupational Hazards, provide the basis for taking preventive measures. Methods: A modern cement manufacturing enterprises workplace dust, noise testing and evaluation. Results: The concentration of dust in the workplace higher, non-qualified point; small noise intensity, the operating point of a pass rate of 50% of the noise intensity. Conclusion: The occupational hazards cement can not be ignored, should be reasonable to improve the role of the environment, effective control of occupational hazards. [Keywords:] cement production enterprises; occupational hazards; detection In recent years, with the booming national economy, although a variety of construction also developed, increasing the demand for building materials, large modern cement production enterprises have also developed rapidly, while its occupational hazards caused by increasingly serious. In order to understand the occupational hazards of cement production situation of enterprises, the author of a large modern cement my flag manufacturers were dust, noise testing and analysis, the results reported below. 1, contents and methods of investigation 1.1 General situation of the enterprise is located in Erdos City, Inner Mongolia, a township, was founded in 2005, covers an area of 13 million square meters, 277 active employees, 156 production workers, with an annual volume of 110 million tons of cement. The main raw material for the slag, silica, slag, fly ash, gypsum, coal. The main production process: mixing materials, clinker, gypsum, cement mill, cement products. The carbide enterprises, raw materials, burning, cement and packaging five Section There are two cement production lines; the production process, mainly produces dust (carbide dust, silica dust, coal dust), ph