道路改建工程优秀毕业设计教程.docVIP

华北理工大学信息学院 摘 要 -PAGE 42- -PAGE 35-  MACROBUTTON MTEditEquationSection2 方程段 1 部分 1 SEQ MTEqn \r \h \* MERGEFORMAT  SEQ MTSec \r 1 \h \* MERGEFORMAT  SEQ MTChap \r 1 \h \* MERGEFORMAT 学 号： 毕业设计说明书 GRADUATE DESIGN 设计题目：丰润区碾唐线—东马庄改建工程设计 学生姓名： 专业班级： 学 院： 指导教师： 年 月 日 摘 要 道路建设在我国具有悠久的历史，远在汽车出现前便有了光辉的业绩。改革开放以后，我国的公路建设实现了跨越式的发展。道路发展的突出成就是高速公路和快速路的快速发展。在今后相当长的时期内加快低等级公路的改建将是我国公路建设的只要内容。 本工程为二级公路改建成一级公路，工程位于河北省唐山市境内。本工程的路面宽度为23.5m。其中公路行车道宽度为15m，中央分隔带宽度为2m，道路总长3131.9m。设计车速80km/h；设计年限为20年。本设计分为五个部分，第一部分为绪论，第二部分为路线设计部分，第三部分为路基设计部分，第四部分为路面设计部分，第五部分为沿线其他设施和环境保护。完成的主要成果有：平面设计图、纵断面设计图、横断面设计图路基设计表、路基土石方数量表、路面结构图等设计主要采用：纬地设计软件和CAD2010，并利用东南大学的路面计算软件HPDS2011对路面计算部分进行验算。 关键词 路线设计；曲线转角表；路基排水；路面设计 Abstract Abstract Abstract Road construction in our country has a long history, far away in the car had a brilliant achievement. After the reform and opening up to the outside world, the highway construction of our country realize the development by leaps and bounds. The outstanding achievement in the development is the rapid development of highways and expressways. In the future quite a long period of time to speed up the reconstruction of low grade highway will be as long as the content of highway construction in our country. This project is secondary highway converted into a road, project is located in Tangshan City, Hebei Province. The project of pavement width for 23.5m. the highway lane width of 15m central separation belt width to 2m, the road with a length of 3131.9m. design speed of 80km / h; design life for 20 years. The design of divided into five parts, the first part is an introduction, the second part for the design part of the route, the third part for the design part of the subgrade, the fourth part for pavement design part, the fifth part along the lines of other facilities and environmental protection. The main achievements: graphic design, longitudinal fault plane design graph, cross-sectional design Subgrade design table