Position sensor in ECG Machine.doc

 PAGE \* MERGEFORMAT 4 Position sensor in ECG Machine Abstract: The ECG machine is the most commonly used medical institutions, the medical profession is one of medical electronic devices. To make medical students on the ECG have a better understanding, this article focuses on the position sensor and its application in the application of ECG detailed description, sincerely hopes that useful. Keywords: Position sensors; principle; application; fault; Maintenance Parameter measurement sensor in the human body from the process of energy conversion and, accordingly, also known as the transducer. In biomedical measurements, you need to determine a variety of mechanical quantities (distance, displacement, force, torsion, speed, acceleration, pressure, etc.), because these mechanical quantities are related to displacement of a certain relationship, it is often first adopted by a variety of mechanical quantities a converter converted into the amount of bits transferred. There are many ways of measuring displacement, such as the optical measurement method, ultrasonic method, radiation imaging. As the price of expensive, usually electrical parameter sensors, such as resistive, capacitive, and inductive and so on. Electrical parameters of the changes in displacement sensors can transform into the corresponding electrical parameters (resistors, capacitors, inductors) changes, and then converted into electrical signal by detecting the circuit magnitude or frequency changes, in order to achieve the purpose of measuring body parameters. A position sensor 1.1 “differential transformer” type of position detection device Differential transformer schematic shown in Figure 1. It contains the primary coil and secondary coil of two parts. Primary coil access to hundreds of KHz AC signal voltage to signal incentives available, secondary coil consists of two structures, dimensions and parameters are the same two coils reversed conca