BatModTM.PDFVIP

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 BatMod Battery Charger Current Source Modules Rev. 1.5 Page 1 of 3 Set your site on VICOR at V I - 2 6 1 - E U - B M Parameter Rating Notes Nominal input voltage 48 Vdc, 150 Vdc, 42 – 60 V, 100 – 200 V, 300 Vdc 200 – 400 V Output current 0 – 14.5 A 12 V battery system (Refer to safe operating curves on page 2) 0 – 7.25 A 24 V battery system 0 – 3.6 A 48 V battery system Current control input 1 – 5 V Zero to max. current Current monitor output 1 – 5 V Zero to full load Voltage control input 0 – 2.5 V Zero to FS output Output voltage setpoint 15 V, 30 V, 60 V +/-1% 12 V, 24 V, 48 V Trimmable +10%, -25% Output Respectively Dynamic characteristics V-Mode: 300 µsec typ. VNOM for 50 – 100% I-Mode: 250 µsec typ. load changes Dielectric withstand Input to output 3,000 VRMS Output to baseplate 500 VRMS Input to baseplate 1,500 VRMS Features • RoHS compliant (VE versions) • Programmable output current • Booster versions available • Size: 4.6 x 2.4 x 0.5 (116,8 x 61,0 x 12,7 mm) • UL, CSA, TÜV • Compatible with all major battery types • Inputs: 48, 150, 300 Vdc • Outputs: 12, 24, 48 Vdc Nominal • Analog current monitor • Analog overvoltage adjust • CE Marked Product Highlights The BatMod combines Vicor’s industry standard package with the flexibility of a power converter whose output voltage and output current may be independently set. BatMod’s allow the user to independently program a constant output current and a maximum float voltage. The float voltage is the point at which the BatMod transitions from constant current to constant voltage. These features make the BatMod an ideal candidate for battery charging and other applications which require a controlled current source. The BatMod is also available in booster versions that enable the designer to create systems capable of multiple kilowatts of output power. With its wide range of input options, the BatMod is compatible with all major battery types. This ne