Fe对Sn-0.7Cu界面组织和拉伸性能的影响剖析.docx

Fe对Sn-0.7Cu界面组织和拉伸性能的影响 摘要：本文主要研究Fe颗粒对Sn0.7Cu钎料界面组织和拉伸性能的影响。结果表明，在Fe的含量为0.05%时，润湿性能达到最佳，界面组织形态也较平缓，并且在此含量下钎料的拉伸性能也达到最佳。但是随着Fe的含量的增加，Sn-0.7Cu的润湿性能有所下降，界面形态异常凸起，界面针状密集，拉伸性能也随着Fe含量增加而就降低，相应地试样的断后伸长长度减小。 关键词:Sn0.7Cu钎料；界面；润湿性能；拉伸强度 Effect of Fe on the Microscopic Tissue Interface and Tensile Properties of Sn-0.7Cu Lead-free Solder Abstract: In the paper, the effect of Fe on the microscopic tissue interface and tensile properties is investigated. The results show that 0.05% Fe is suitable.Sn0.7Cu can have best wetting properties, highest tensile properties and gentle boundary. But, if the content