航天燃料运输用罐箱插底管的固定装置设计.pdfVIP

学兔兔 机械工程师 MEe ANlCAI lN篓基辩 回凤娜，王忠连，倪建生， 李永哲，金锋。 吴云日，刘春良，李波 (大连中集物流装备有限公司，辽宁 大连 116600) Fixing Device Design of Bottom Pipe on Aerospace Tank for Transporting Fuel HUI Fengna， WANG Zhonglian， NI Jiansheng， LI Yongzhe。 JIN Feng。 WU Yunri。 LIU Chunliang， LI Bo (Dalian CIMC Logistics Equipment Co．，Ltd．，Dalian 1 1 6600，China) Abstract：The paper describes aerospace tank for transporting fue1．Due to its especial working principle，the outlet is designed on the top of the tank，and the outlet pipe extends to the bottom of the tank inner to discharge the fuel extruded by a certain pressure．The outlet pipe has small diameter，thin thiekness alld the long length．For preventing the oceutTenee of big displacement and deformation and crack，the fixing device should be desiglted for limiting its displacement．This paper adopts a new structure type for the fixing device，SO that we can fully guarantee the strength safety of the outlet om pipe in the transport and transfer and supply the desig~1 thought and reference for other similar structures． bott ． Key words：aerospace tank for transporting fuel；outlet bottom pipe；fixing device；guide pin 0 引 言 法兰盖 卜，见 用于航天燃料运输用的罐箱由于其特殊的工作流 冈2。出料插 程，所设计的}H料管位于罐箱顶部，并设计为捅底管，以 底管设计在 实现尽可能充分、完全地出料。但由于此出料插底管的尺 人孑L法兰盖 寸为 16 nlrex3 mmxl700 him，即直径小、壁薄、长度长， 的中心位置 且罐箱需在发射基地进行转注运输等动态工作，易产生 上，见图3。从 罐内燃料的波动冲击，这就使罐内出料插底管的强度安 罐 内观察 出 全成为r设计中的重点与难点。