Analysis of Auxiliary Winding Effect on the Leakage Inductance Reduction in the Pulse Transformer Using ANSYS英文文献资料.docVIP

J. Electromagnetic Analysis Applications, 2010, 2, 513-518 513 doi:10.4236/jemaa.2010.29067 Published Online September 2010 (http://www.SciRP.org/journal/jemaa) Analysis of Auxiliary Winding Effect on the Leakage Inductance Reduction in the Pulse Transformer Using ANSYS Alireza Khodakarami , Seyyed Mohammad Pedramrazi , Hassan Feshki Farahani 1 2 3 1 3 Islamic Azad University, Shahre Ghods Branch, Tehran, Iran; Islamic Azad University, Tehran North Branch, Tehran, Iran; 2 Islamic Azad University, Ashtian Branch, Ashtian, Iran. Email: {aqukh, m_pedram_razi, hfeshki}@ Received July 20 , 2010; revised August 18 , 2010; accepted August 18 , 2010 th th th ABSTRACT Several applications need high voltage and low rise time pulses that increasing of the voltage level can be done by us- ing transformer. The rise time is increased because of transformer leakage inductance. One of the methods to decrease the rise time is using auxiliary windings between primary and secondary. In this paper, one type of pulse transformer included auxiliary windings is modeled and simulated in ANSYS software. In this study, at first the transformer has been simulated without auxiliary windings and the leakage and self inductances are obtained then the auxiliary wind- ings are considered in the model to calculate the leakage and self inductances of the transformer. Simulation results can be used to investigate the effect of auxiliary winding on the leakage inductance. Keywords: Auxiliary Windings, Leakage Inductances, Finite Element Method and ANSYS 1. Introduction mary and secondary on different core legs, is seldom used in pulsed application, because of its weak