破碎机锤头耐磨材料与制造工艺的发展_李梦.pdfVIP

Development of wear-resistant materials for crusher hammers and their manufacturing process LI Meng, CHENG Juqiang, GAO Zichen, LIU Zhixue College of Materials Science Chemical Engineering, Xian Technological University, Xian 710032, Shaanxi, China Abstract The kind of common materials for crusher hammers and their microstructure, properties and characteristics were introduced, and several processes of manufacturing wear-resistant materials and their characteristics were summarized. Wear-resistant materials for the crusher hammers should be selected according to the kind of crushing material and equipment status. While the hammer had higher operating stress, the high manganese steel or ultra-high manganese steel could be selected for hammer material and the hammer could be manufactured by integral casting. While the hammer had lower operating stress, integral casting of alloy steel or compound casting of carbon steel and high chromium cast iron could be selected. The application of compound casting to manufacture of the crusher hammer was a good way to improve the lifespan of the crusher hammer. Keywords crusher hammer; wear-resistant material; manufacturing process