承台基础钢筋加工、搬运、安装的安全措施.doc

承台基础钢筋加工、搬运、安装的安全措施 承台基础钢筋加工、搬运、安装的安全措施提要：钢筋加工（拉伸、切割、弯曲、接长等）采用机械进行作业。所用机械的电源由专业电工负责安装。其中总电源由项目部安排建设公司电装工程处负责架设到位 源自计划范文 承台基础钢筋加工、搬运、安装的安全措施 ⑴．在本项目中，钢筋的制作量较大，全部采取在现场设置钢筋加工棚进行制作的方式进行制作。 ⑵．钢筋运至现场卸料时，按照安全操作规程要求，由持证的架工指挥吊车进行吊卸。作业前需注意作业环境，然后选择合适的站位位置、吊臂旋转方向、杆长以及夹角等。卸车的钢筋按规格不同分别摆放并作标识，便于保管和领用。 ⑶．钢筋加工（拉伸、切割、弯曲、接长等）采用机械进行作业。所用机械的电源由专业电工负责安装。其中总电源由项目部安排建设公司电装工程处负责架设到位。机械操作由持证的操作人员负责按照相应的设备安全操作规程进行操作和维护 ⑷．制作好的钢筋在现场进行搬运时主要采用人工进行。由于基础外形尺寸较大，相应的大尺寸的钢筋也较多，不少需要两人以上进行协作才能搬走。同时，现场作业环境复杂，基坑不是顺序进行开挖，导致行走通道弯曲绕折。因此，在搬运钢筋制成品时，协作者必须是年龄、个头相仿者，组成互保联保对子，以便容易形成默契。同时，在行走过程中，需随时注意周围环境，相互照应，以免发生意外。 ⑸．钢筋制成品搬运至基坑边后，需垂直运输到6m深的基坑里进行安装。此时需注意：①．在基坑内搭设临时作业平台（利用支撑模板的脚手架铺设竹跳板形成），以便于基坑内外协作将钢筋传入基坑内；②．钢筋从基坑临边围栏上方跨过，不得为图方便而随意拆除临边围栏；③．传递到基坑内的钢筋制成品及时安装到位，减少积压。 源自计划范文 Measures for the routine management of moral education in Middle SchoolsMethod of conventional management of moral education in middle schoolFirst, the guiding ideology:School moral education is an organic whole of the whole education work, always adhere to the school adhere to the moral education, education for this product, and actively promote the quality education, the school building efficient curriculum system of moral education, moral education, improve the sense of attraction and appeal, enhance the moral education work for through and timeliness. Teach everyone, service education and management education, and school moral education work must be with family education and community education closely together, to form a concerted pattern, and strive to create a good atmosphere for education, and to promote the all-round development of students, to establish a scientific moral education full of vigor the For long-term mechanism.Two, the goal of moral education:To guide the students to form the correct world outlook, outlook on life, values, to cultivate students unity and mutual assistance, honest and trustworthy, law-abiding, good quality, hard work, set a good XX students ideological quality, psychological qualit