《桥梁工程》温习题_选择题和揣摸改错题1(国外英文资料).docVIP

《桥梁工程》复习题_选择题和判断改错题1(国外英文资料) Bridge project. Applicable class: 1 ~ 2 class in 1 grade 1 traffic Using textbooks: yao lingsens bridge project (second edition) A, multiple choice The basic composition of the bridge consists of the upper structure, the lower structure and ___C_____ A. ground b. bridge c. taper slope d. base The high water level of the design of the bridge is called __D_____. A. the water level is at the highest level 3. The two adjacent beam bridge pier horizontal distance between center line, or between center line of pier and abutment back front machine horizontal distance, called ___D_____ A. the cross diameter c. the standard cross-diameter d. calculate the cross-diameter The distance between the two side walls of the bridge and the rear end of the wall is called ___C___. A. bridge span b. bridge C. the bridge is full of D The length of the bridge is (C). A. the distance between the front and back of the bridge The distance between the two points of the bridge C. The distance between the ends of the two Bridges of the bridge D. The sum of the net span of each hole The height of the bridge is (A). The height difference between the bridge and the bridge The difference between the bridge and the bottom of the pier The difference between the deck and the ground D. The difference between the deck and the foundation Bridges are divided into ___A_____ by system. A. bridge, arch bridge, rigid frame bridge, cable bearing system bridge and composite system bridge B. the bridge of the beam bridge, the cantilever bridge, the continuous girder bridge and the continuous rigid frame bridge C. wooden bridge, steel bridge, masonry bridge, reinforced concrete bridge and prestressed concrete bridge D. road bridge, railway bridge, pedestrian bridge and agricultural bridge The main difference between the beam bridge and the arch bridge is ___C____. Under vertical load, the bridge has horizontal and horizontal force Under vertical load, the bridge has horizontal and ho