修建技巧常识(国外英文资料).docVIP

建筑技术知识(国外英文资料) A rib, a rib, a long string? What is the real meaning of the rib and the long steel bar? First, we need to understand the concrete meaning of the stirrup, because the steel reinforced concrete beams always have a hoop. When there is a hoop, if there is nothing else to prop it up, it will be helpless. Generally speaking, the upper part of the beam has negative reinforcement, whether it is stressed or constructed. According to the force or construction, the beam sets double limb or limb hoop. If its a limb hoop, there must be four corners. If the four points are not left vacant, four bars must also be attached to the beam. For the frame beam, the two sides of the beam have the force reinforcement, in theory, the beam is in the middle 1/3 section, not force or is only very small force. So, in the upper part of the beam, you dont have to have a longitudinal bar. But, it says, with stirrup nor empty, will set the root number and the number of stirrups limb corresponding structural steel, the steel structure, small diameter than the reinforced, we call them a stud. And its possible to include what is known as a tenor bar. The structure of the frame structure of the framework of the aseismatic design is mainly used in the frame structure of aseismic design. In aseismic design, the number of steel bars in the beam is limited, according to the specific forces, sometimes the upper steel bars are all connected. When the length of the upper part is less than the length of the band, it is necessary to fill the hoop with a small diameter bar. The long steel bar is always placed on the outside, and the stand is in the middle. Rack at the ends of the stud and the rest of the reinforced overlap each other, the lap length, average units for 15 D D, in addition to the special requirements, although the range is generally from 150 to 250, but the statement is not correct Through the reinforcement of the beam, the steel bar is under the pressure of the beam. In order to