20Cr2Ni4A_20g异种钢_省略_abCO_2激光深熔焊接工艺研究_石岩.pdfVIP

38 　6 　　　 Vol.38, No.6 2011 6 CHINESE JOURNAL OF LASERS June, 2011 20Cr2Ni4A-20 g异种钢Slab CO2 激光 深熔焊接工艺研究 石　岩　刘　佳　张　宏 (, 130022) 　20Cr2Ni4A-20 g , 5 kW S lab CO 20Cr2Ni4A 2 20 g 。 、、 。, 。 、、, 8 mm 20Cr2Ni4A-20 gCO :+2 mm, 5 kW, 2 2.5 m/min, 5 L/min H e 20 L/min Ar , , 20 g, , 。 　;;;;; 　T G456.7 　　　　A 　　　doi:10.3788/CJL 201138.0603011 Study onDeep Penetration Laser Welding of 20Cr2Ni4A-20 g Dissimilar Steel by SlabCO2 Laser Shi Yan　L iu Jia 　Zhang Hong (College of Electromechan ical Engin eering , Changchun University of Scien ce and Techn ology, Changchun , J ilin 130022, Chin a ) Abstract　The deep penetration laser welding o 20Cr2Ni4A-20 g dissimilar steel is studied to increase the welding e iciency.The e ects o laser welding parameters on the morphology o welding seam are investigated using 5 kW Slab CO2 laser.The tensile strength is tested by material testing machine, and the racture morphologies are observed by scanning electron microscopy.The results show that the welding j oint can be optimized by adjusting the de ocusing distance, coaxial shielding gas low rate, laser power and welding speed.The optimum process parameters o 8 mm thickness o 20 g and 20Cr2Ni4A dissimilar steel are:a laser power o 5 kW, a welding speed o 2.5 m/min, a shielding gas o 5 L/min He and 20 L/min Ar and a ocusing distance o +2 mm.Under the optimum process parameters, the tensile strength o the welded joint is better than 20 g matrix, which is