半组合结构压弯构件滞回试验的有限元模拟.pdfVIP

学兔兔 第27卷 第1期 建筑科学与工程学报 Vo1．27 NO．1 2010年 3月 Journal of Architecture and Civil Engineering Mar．2010 文章编号：1673—2049(2010)01—0084—05 半组合结构压弯构件滞回试验的有限元模拟 陈以一，王 拓 (同济大学 建筑工程系，上海 2O0092) 摘要：基于按结构材料力学功能建立离散化单元的思想，将混凝土离散为各向的弹塑性弹簧单元， 建立了半组合结构柱的有限元模型。通过有限元软件ANSYS对6个半组合结构压弯构件进行了 反复荷载作用下的滞回性能非线性分析，得到了其荷载一位移曲线，并与试验结果进行了对比。结 果表明：由有限元模型得到的滞回曲线与试验曲线相似，模拟效果良好；该有限元模型能模拟构件 的弹塑性行为和抗震性能，建模简单，结果可信，计算效率高，可用于构件滞回性能的参数分析。 关键词：半组合结构；压弯构件；滞回性能；非线性有限元分析；离散模型 中图分类号：TU391 文献标志码：A Finite Element Simulation on Hysteretic Experiment of Partially Encased Composite Structures Subj ected to Combined Compression and Bending Members CHEN Yi—yi，W ANG Tuo (Department of Building Engineering，Tongji University，Shanghai 200092，China) Abstract： Based on the concept of dispersed elements corresponding to different mechanical functions of structural materials in partially encased composite(PEC)columns，a finite element model of partially encased composite column was built up by dispersing the concrete into elasto— plastic springs elements in perpendicular directions．By using ANSYS finite element software， nonlinear analysis was carried out for simulation of the hysteretic behavior of 6 PEC columns under cyclic loads．The load—displacement curves were obtained and compared with experimental curves．The result demonstrates that the curves of numerical simulation and experiments are corresDondence with each other，which means the simulation iS valid．The finite element mode1 can