螺栓连接变电构架柱结构分析.pdfVIP

维普资讯 学兔兔 第30卷 第1期 重 庆 建 筑 大 学 学报 Vo1．30 NO．1 2008年 2月 Journal of Chongqing Jianzhu University Feb．2008 螺栓连接变电构架柱结构分析 朱爱珠 ， 郭耀杰 ， 程 超。， 胡小龙。 (1．华中科技大学 土木工程与力学学院，湖北武汉 430074；2．武汉大学 土木建筑工程学院，湖北武汉 430072；3．中南电力设计院， 湖北武汉430071) 摘要：与传统焊接A字变电构架柱相比，新型构架柱螺栓连接柱头各构件关联体小，工厂加工、运输和 安装较简单，尤其是镀锌难度和镀锌成本能较大幅度地降低，整体经济性较好。运用有限元分析方法， 研究了螺栓连接构架柱的柱高、根开与柱高比值、管壁厚度等因素对构架柱整体刚度和强度的具体影 响，为螺栓连接的新型构架柱结构设计和优化提供了有利的理论依据。 关键词：A字构架柱；螺栓连接；结构分析；有限元；变电站 中图分类号：TU 391 文献标识码：A 文章编号：1006—7329(2008)01—0072—05 Structural Analysis of the Bolting Truss—column of Substation ZHU Ai—zhu ，GUO Yao—jie。，CHENG Chao。，HU Xiao—long。 (1．School of Civil Engineering Mechanics，Huazhong University of Science and Technology，Wuhan 430074，China；2．School of Civil Engineering，Wuhan University，Wuhan 430072，China 3．Central Southern China Electric Power Design Institute，Wuhan 430071，China) Abstract：Compared with the traditional welding truss-column in shape of A，the members of the bolting top— ioint are much smaller than the common welding joint．Furthermore，the members are more convenience on fabrication，transportation and installation．It should be noted that the zinc process iS much easier and cheaper． In this paper，by using the finite element method，the effect of many factors to the global stiffness and the intensity of the bolting truss—column are analyzed；the factors include the column height，the root width tO column height ratio，the tube thickness，etc．The resu lts obtained are favorable references for design and optimization of the bolting truss—column of substation． Keywords：truss—column in shape of a，bolting，structural analy