落叶松锯材抗弯强度尺寸效应.pdfVIP

  • 7
  • 0
  • 约1.45万字
  • 约 4页
  • 2017-05-25 发布于河南
  • 举报
学兔兔 第35卷第1期 Vo1.35 NO.1 2O13年2月 Feb.2013 落叶松锯材抗弯强度尺寸效应 周海宾 ,王学顺 (1.中国林业科学研究院 木材工业研究所,北京 100091; 2.北京林业大学理学院,北京 100083) 摘 要:以兴安落叶松锯材为研究对象,研究了不同目测等级下锯材尺寸与其抗弯强度之间的关 系。试验选取196l根6.5、9.0和14.0 em 3种宽度尺寸的目测等级锯材,每个宽度尺寸分为高、低 目测等级组,按照每组试件宽度18倍的测试跨度测试锯材的抗弯强度。利用斜率法和形状参数法 确定高、低目测等级组抗弯强度5 分位值的长度与宽度的组合尺寸效应。研究结果表明,斜率法 获得高、低目测等级组试件抗弯强度 5 分位值的组合尺寸效应分别为0.19和0.23。 关键词:落叶松;抗弯强度;尺寸效应;木梁 中图分类号:TU531.1 文献标志码:A 文章编号:1674-4764(2013)01一O]】7—04 Size Effect of Bending Strength of Chinese Larch Lumber Zhou Haibin ,Wang Xueshun (1.Research Institute of Wood Industry,Chinese Academy of Forestry,Beijing 100091,P.R.China 2.College of Science,Beijing Forestry University,Beijing 100083,P.R.China) Abstract:The relationship between the bending strength and the size of Chinese larch visually—graded lumber was investigated.1,96 1 pieces of lumber with three different widths were divided into two groups of high visual grades and low visual grades.The ultimate bending strength was tested under test spans of 1 8 times test depths.The combined length and width size effects of 5th percentile of bending strength were estimated by the slope method and the parametric method.Using the slope method,the estimated effect parameters of H and L were 0.19 and 0.23 for the 5th percentile. Key words:Chinese Iarch;bending strength;size effect;wood beam 木材是四大建筑材料之一,也是最为环保且可 的尺寸调整系数,木材设计指标的确定缺乏科学的 持续的材料l_】]。木材在建筑结构中,常被用作梁、柱 理论依据。 等构件。梁构件抗弯性能的设计指标早期主要来自 Bohannan_6]最早确定了木梁抗弯强度的高度与 于无缺陷小试件的测试结果,再考虑节子、斜纹理等 长度组合尺寸效

文档评论(0)

1亿VIP精品文档

相关文档