高肋板式桥台静载试验与分析.pdfVIP

学兔兔 第40卷，第6期 公 路 工 程 Vo1．40，No．6 2 0 1 5年 1 2月 Highway Engineering Dee．，2 0 1 5 高肋板式桥台静载试验与分析 王解军，刘昕炜，李 旺 (中南林业科技大学 土木工程与力学学院，湖南 长沙 410004) [摘 要]针对某工程实例简支梁桥的高肋板式桥台，采用有限元软件MIDAS／CIVIL，考虑肋板、承台及桩基 础，建立桥台结构实体有限元模型，对荷载作用下肋板的水平位移和应力进行计算分析。对桥台进行静载试验，采 用车辆加载，全站仪测试台顶水平位移，电阻应变计与应变仪测试肋板应力。通过实测结果与理论值的对比分析， 对桥台的技术状况进行评定。 [关键词]高肋板式桥台；静载试验；位移与应力；有限元分析。 [中图分类号]U 443．21 [文献标识码】A [文章编号]1674—0610(2015)06—0010—03 The Static Load Test and Analysis of the High Rib--plate--shaped Bridge Abutment WANG Jiejan，LIU Xinwei，LI Wang (College of Civil Engineering＆Mechanics Central South University of ForestryTechnology，Changsha Hunan 410004，China) [Abstract]In view of the high rib—plate-shaped bridge abutment of the simple supposed beam bridge in an engineering example，taking the ribbed slab，the pile cap and the pile foundation into con- sideration，we use the finite element software，MIDAS／CIVIL，to build the solid element model，which we calculate the horizontal displacement and stress under the load．With the vehicle load making the stat- ic load test，we use the total station to measure the horizontal displacement of the abutment on the top， and using the resistance strain gauge to measure the stress of the ribbed slab．By comparing the experi— mental results with the theoretical value，we make the technical condition evaluation of bridge abutment． [Key words]high rib-plate—shaped bridge abutment；the static load test；displacement and stress； finite element