一种基于IoT控制的小区间功率控制方法.pdfVIP

第 31 卷第 11 期 电 子 与 信 息 学 报 Vol.31No.11 2009 年 11 月 Journal of Electronics Information Technology Nov..2009 一种基于IoT 控制的小区间功率控制方法 李中年①② 郑 毅② 王亚峰② 杨大成② ①(华中师范大学电子与信息工程系 武汉 430079) ②(北京邮电大学无线理论与技术实验室 北京 100876) 摘 要：该文针对 OFDMA 蜂窝系统中上行干扰特性，提出了基于 IoT 控制的小区间功率控制方法。该方法通过 相邻小区相互交换干扰信息，对传统的功率控制进行修正，并根据调整原则和调整步长，提出了 4 种控制方法， 使得系统 IoT 更稳定，吞吐量更高。仿真证实了这 4 种控制方法都优于传统未加 IoT 控制的功率控制方法，其中 基于固定比较对象的自适应调整步长的功率控制方法最优。 关键词：OFDMA；功率控制；小区间干扰；IoT(干扰噪声) 中图分类号：TN929.5 文献标识码：A 文章编号：1009-5896(2009)11-2703-05 An Inter-cell Power Control Method Based on IoT ①② ② ② ② Li Zhong-nian Zheng Yi Wang Ya-feng Yang Da-cheng ①(Department of Electronic and Information Engineering, Huazhong Normal University, Wuhan 430079, China) ②(Wireless Theory and Technology Lab, Beijing University of Posts and Telecommunication, Beijing 100876, China) Abstract: Considering the uplink inter-cell interference in the OFDMA cellular system, an inter-cell power control method based on IoT is proposed. This method gives an amendment on the traditional power control through the exchange of the interference of the neighbor cells, and in accordance with the adjustment principle and adjustment step, four power control methods are put forward, which can make IoT more stable and have higher throughput. The simulation results show that all these four methods are superior to the traditional power control method, in which, the adaptive step power control combining with fixed target IoT is optimal. Key words: OFDMA; Power control; Inter-cell interference; IoT(Interference over Thermal)