古建筑砖瓦规格(国外英文资料).docVIP

古建筑砖瓦规格(国外英文资料) Should be 53 mm * 240 mm * 115 mm Ordinary mortar layer thickness 10mm Construction process and scheme of cement tile roof News author: administrator clicks: 1285 news time: 2009-10-128:19:21 font size Cement roof construction plan; The line of water and water is fastened to the surface of the water layer, and it is waterproof 1, compilation basis, 1.1 Beijing fengtai district building construction drawings 1.2 Beijing fengtai district building engineering practice table 1.3 Beijing building installation subdivisional work procedure DBJ/T 1.4 01-26-2003 roofing waterproof construction technology procedures DBJ 01-93-2004 The quality acceptance specification of 1.5 roof project GB50207-2002 1.6 house decoration and decoration construction specification gb50327-2001 Article 1.7 the quality acceptance of the construction decoration project, GB50210-2001, the standard gb50300-2002 The project is located in guo gongzhuang road of fengtai district, Beijing. The roof is dominated by the colorful concrete tiles, with the local people and the roof. Heres what we do: 2.1, 88JZ17 W8, modified color concrete tile roof (top down) 1) colored cement tiles; 2) 30 * 30 wooden hang tiles; 3) 30 * 30 wooden shingled water, with a pre-buried 12 galvanized mild steel wire binding; 4) 30 thick C15 bean stone concrete protection layer, with a two-directional distance of 900 in the phi 6 bar, pre-buried 12 galvanized low carbon steel wire lashing in the water bar, the middle distance 900 x 900; 5) 1.5 thick single-group polyurethane waterproof coating; 6) 20 thick 1:3 cement mortar for leveling; 7) 50 thick extruded sheet with polymer slurry paste, the eaves are set up 70 high reinforced concrete eaves (see the table of decoration); 8) reinforced concrete roof panels. 2.2 sloped eaves (top down) : 1) color cement tiles 2) 30 thick C15 concrete with fine stones, embedded article 30 х 30 wooden hang tile, the tile with steel nails on the hanging bar 3) CL7.5 ceramic concrete