压前含水率对杉木间伐材压缩木性能的影响.pdfVIP

林严工业 CIßNA FOR正:sr PRODUCrs lNOUSIRY 会d剖YSIS 阻前含水率对杉木问伐材压缩木性能的影晌 陈瑞英挽萍刘景宏 摘要. 通过2才杉木问伐材压缩辛苦化的*分和物理力学性能进行分析，并观察木材微观络构的变化.nJ1￥ JJ\ 以下给主怪，1) ffi辙1*各方riiJ的水分分布不均匀，容易翘陶变形，2) 水分对ffi缩本的物现力学性能有影响.ffi前含水来，)0%左有.J Ii缩 木硬度、杭弯弹性楼;垦和日忧弯强度最大，但冲击韧性随着压1ltr含水旦在的增加垒下降趋势。从微现t占构的观察1íJJ，U ，杉木 间伐材压缩木的细胞只是被挤底，细胞股变小而细胞贼未受到破坏。为了降低以后食水亭，使水分分布均匀，可以采取 的种办法，是使初始由水率尽可能低，叫趁热ffi如rlÎ叫尽时能长。 关键询: 杉木归iJf克材 p 压缩密化;含)JB在:力学性质 中自司分类号:丁5653.7 文献标识码，A 立王军编号， 1001- 5299(2006)0]-0010- 04 Influence of Initial Moisture Content on Mech且nical Properties of Compresscd Chinese Fir Thinnings CHEN Rui-ying WEj Ping LlU Jing hong (Fuji时1 Agriclllture and Forestry Univf:r~ity ， Fuzhou 3日ω2.China) Abstl3Ct , Through analyzin日 the moisture distribution ,physical and mcchanical properties of corn… pressed Chinese fir thinnings.füllowin日 conclusions are drawn ,l)Moisture distribution in different di- re 元ions Clongitudinal ， radial and tangentia l)of the compressed wood is uneven ,which leads to wrap and distortirm;2)Initial moisture content(before compression)has influence on rnechanical propertíes of thc compres附d wood ,the hardncss ,MOE and M()R 01 the compressed wood with initial rnoisture content bcing about 50% are the bcst ,but impact strength shows a tendency to drop with increase ()f initial ffi01sture cont日11. 1主y observing microscopic structurc 01 the compressed wood ,it is [ound thal only cell cavity of Chìncsc fir has b时n cornpressed , but cell wall has not been destroyed. In ordcr to reduce moisture contcnt of compre~med wood and inlp