冶金行业密封应用.pptVIP

3、高线油膜轴承用双唇水封 安装方法: 1、将金属环从密封上取下 2、将密封放入密封架 3、将金属环装入工装部件1 4、将部件1装入部件2 5、往密封件上涂油 6、将完整工装装入密封，并用力装入 7、 移去部件2 8、 移去部件1 9、检查金属环是否装好 冶金行业客户 冶金行业客户清单参见附件 Thanks for your attention October 30, 2007 ? SKF Group Slide * * * * * * Text slide, with title and body text [Autolayout: Bulleted List] This slide exists as a ‘slide master’ therefore all type, sizes and positions are fixed. Simply type into the prompt boxes. The SKF Supergraphic is also positioned on the ‘slide master’ in a fixed position. The layout is set as a ‘title’ box and a ‘text box’. Within the text box there are 5 levels of type: Level 1 – Body text set in SKF Chevin Medium 24pt with 32pt linefeed. 12pt additional space below paragraph. Level 2 – Bulleted body text set in SKF Chevin Medium 18pt with 25pt linefeed. 12pt additional space below paragraph. Level 3 – Bulleted body text set in SKF Chevin Medium 16pt with 22pt linefeed. 11pt additional space below paragraph. Level 4 – Bulleted body text set in SKF Chevin Medium 15pt with 20pt linefeed. 10pt additional space below paragraph. Level 5 – Bulleted body text set in SKF Chevin Medium 14pt with 18pt linefeed. 9pt additional space below paragraph. Within standard body text, subheads are set in SKF Chevin Bold. To advance to each level from the previous one, you select ‘demote’ which is the green right arrow on the Outlining tool bar. To return to previous level, select ‘promote’ which is the green left arrow on the Outlining tool bar. While the text start position is fixed, the text box will grow as you type further down the slide, therefore care and attention should be taken so as not to set type below the bottom margin - see typographic grid ‘Ctrl G’. Text slide, with title and body text [Autolayout: Bulleted List] This slide exists as a ‘slide master’ therefore all type, sizes and positions are fixed. Simply type into the prompt boxes. The SKF Supergraphic is also positioned on the ‘slide master’ in a fixed position. The layout i