切削加工中影响外面粗拙度成分的剖析与对策(国外英文资料).docVIP

切削加工中影响表面粗糙度因素的分析与对策(国外英文资料) Analysis and countermeasures of surface roughness factor in machining Sun Qi University of northeast university mechanical engineering automation major 1109Abstract: all kinds of machine tool has the most economic, most suited to reach the surface roughness of the range, if required at roughness level above its economic level, will lead to a sharp rise in the cost. If the level of roughness that is required is too low, the resource is wasted. Therefore, to comprehensive consideration and analysis of the various factors that affect the surface roughness in machining, including the selection of the cutting tool and using, cutting speed and feed, etc., to meet the requirements of surface roughness. Abstract: the company kinds of those have a range which is the most economical and the most suitable. If the standard roughness concentration exceeds the standard of pa., which case the cost arise. If the situation is the contrary, it will be a waste. So we will take all the factors which influence the superficial roughness concentration in consideration, o the option of cutting tools and cutting speed the amount of feed and So on, to reach the standard of roughness concentration. The analysis of the main factors affecting the surface roughness during machining The influence of tool geometry and cutting motion Tool making feed movement relative to the workpiece, the processing surface residue left behind the cutting area, causing the surface roughness, residual area is the shape of cutting tool geometry rerun, its height by the tool geometric angles and the influence of cutting parameter size. When cutting with a straight blade, H = f/CTGKR + CTGKR, when cutting with an arc blade, H = f2/8 r E. Known from the type, reduce feeding, principal deputy Angle Angle K r, K f r and increase the tip arc radius r, all can reduce the height of the residual area, thereby reducing rent surface roughness. 【 1 】 Tool wear Tool wear causes the surface