反应堆物理习题集谜底(国外英文资料).docVIP

反应堆物理习题集答案(国外英文资料) What is the maximum number of flux density in the heap? (2) the neutron flux density vector at any point in the reactor. (3) what is the number of neutrons leaking out of the heap per second? (1) the maximum amount of flux density in the heap is at the point where: Neutron/centimeter 2 seconds (2) (neutron/centimeter 2 seconds) (3) (neutron/second) 16. One side a = 800 cm long bare homogeneous cube heap, the heap in the thermal capacity, as shown, the temperature is 400 ℃, the measurements of the thermal diffusion coefficient and diffusion length is 0.84 cm and 17.5 cm, respectively (1) calculate pile of any point within the neutron flux density vector, (2) per second from thermal reactor leak out? (3) how many thermal neutrons are absorbed in the reactor? (4) what is the probability of a thermal neutron leaking from the heap? (1) according to the fik law, (2) 1.03 * 1016 (3) 7.25 * 1017 (4) 1.4% The flux density of the critical uniform ball, which has a radius R, is distributed as the total power of the reactor, which is the energy of each fission release. For the macroscopic fission cross section, r is the distance from the center of the sphere. The flux density of uniform bare piles of cuboids is shown to be distributed as the total power of the reactor, and V is the volume of the reactor. High 100cm, 100cm in diameter, a cylindrical uniform pile is running on a stable power 20MW, and if the origin is at the center of the heap, at r = 0, what is the power density at z = -25cm? 5-6.557 * 10 MW/cm3 20 45 cm radius of spherical uniform naked in the heap measured at r = 15 cm from the center of a pile of fission density for fission/cm 3 seconds, q (1) run heap on how stable power? (2) what is the fission density in the heap? (1) 1.122 MW (2) 3.02 * 1011cm - 3s - 1 21. There is a made of mixing and graphite thickness is 200 cm of critical of infinite plate naked heap, maximum for neutron flux density/cm 2 seconds, using a group of theoretical calcu