粗拙度换算(国外英文资料).docVIP

粗糙度换算(国外英文资料) The smoothness and roughness Ra, Rz numerical comparison table (unit: mu m) Surface finish Del 1 Del 2 Del 3 Del 4 Del 5 Del 6 Del 7 The surface of the roughness Ra 50 25 12.5 6.3 3.2 1.60 0.80 Rz 200 100 50 25 12.5 6.3 6.3 Surface finish Del 8 Del 9 Del 10 Del 11 Del 12 Del 13 Del 14 The surface of the roughness Ra 0.40 0.20 0.100 0.050 0.025 0.012 - Rz 3.2 1.60 0.80 0.40 0.20 0.100 0.050 Additional: surface roughness international standard Standard grade code The surface roughness Tooling (method) Processing materials and hardness requirements Photometric description Coarse grinding grain size Fine grinding grain size Diamond paste and polishing SPI (A1) Ra0.005 S136 54 HRC The finish is very high, the mirror effect 8407 52 HRC SPI (A2) Ra0.01 DF - 2 58 HRC Low finish, no sandpaper XW - 10 60 HRC SPI (A3) Ra0.02 S136 300 hb A lower level of finish, but no sandpaper Name of 718 300 hb SPI (B1) Ra0.05 There is no brightness, there is a slight 3000 # sandpaper grain SPI (B2), Ra0.1 There is no brightness, there is a slight 2000 # sandpaper grain SPI (B3) Ra0.2 There is no brightness, there is a slight 1000 # sandpaper grain The direction of the process trace is not discernible Ra0.4 Finish machining: fine car \ precision milling \ mill \ reaming \ scraping The direction of the process trace Ra0.8 Finish machining: fine car \ precision milling \ mill \ reaming \ scraping The direction of the discernible marks Ra1.6 Ra3.2 Ra6.3 Ra12.5 Ra25 Ra50 Table of surface roughness of the U.S. and China Chinas old standard (smoothness) Chinas new standard (roughness) Ra American standard (micron??) , Ra American standard (microinch), Ra Del 4 6.3 8 320 6.3 250 Del 5 3.2 5 200 4 160 3.2 125 Del 6 1.6 2.5 100 2 80 1.6 63 Del 7 0.8 1.25 50 one 40 0.8 32 Del 8 0.4 0.63 25 0.5 20 0.4 16 Roughness RMS and RA, RZ, RY conversion?? 2010-05-27 18:41:31 |? Category: default category |? Label: |, small and medium size? To subscribe to 1 mm = 1000 um, um 1 = 1000 nm ? The RMS v