十、第二课程设计任务书计算书(国外英文资料).docVIP

十、第二课程设计任务书计算书(国外英文资料) Design and design of a single, single, single-layer structure design To design materials (copy the contents of the book) The selection of structures: Recommended structure form: Roof board: selected from [G410], see figure 20 Board weight: 1.3 kN/m2 (along the slope) Built-in weight: 0.1 kN/m2 (along the slope) Digou plate: selected from [G410], see figure 21 3, gutter weight (including water weight) : 17.4 kN/root 4, skylight frame: Π form skylight frame made of steel and concrete Adapted from [G316]. Skylight frame and windshield pass The weight on the roof is shown in figure 22 5, the prestressed steel mixed sinusoid is chosen from [G415], the frame axis of the roof is shown in figure 23. Each frame has a weight of 60.5 kN. Figure 23 Roof support: selected from [G415] Weight: 0.05 kN/m2 (along the water level) Basic beams: selected from [G320], b * h = 250 x 450mm, Each weight: 16.90 kN Crane beams: selected from [G323], as shown in figure 24 Each weight: 50 kn Weight of orbit and cushion: 0.6 kN/m The section and the dimension of the connecting beam and the beam are shown. Column support: selected from [G142.1] Base on the basis of a single cup, the foundation top level is: -0.6 m. Column size: A) and the height of the column: the upper column, Hu jintao, is 11.4-7.8 = 3.6 m Lower column high Hl = 7.8 + 0.6 = 8.4 m (base top elevation - 0.6 m) High column total H = B), column section size: it is recommended that the column is square cross section, b * h = 400 * 400 mm, and under the column for the i-section section, b * h * h f = 400 * 800 * 800 mm, bracket size, height of the column bottom rectangle section size as shown in figure 25. The geometric eigenvalues of column cross section are: A1 is equal to 1.6 times 105 m m2, which is 2.13 times 10, 9 m m4 A2 is equal to 1.775 times 105 m m2 I2 is 14.38 times 10, 9 m m4 Calculation of load and load: (all by standard value) Permanent load (see figure 26) The permanent load of the G1k (A or B