单层工业厂房习题(国外英文资料).docVIP

单层工业厂房习题(国外英文资料) Problem of concrete and concrete single-layer industrial workshop One, fill-in-the-blanks: There are two types of building structure. The horizontal frame of the factory is made up of. 3, workshop longitudinal shelving consists of,,,,,. 4, between roof support including,,,,. 5, reinforced concrete bent frame structure is the biggest space for single-layer workshop when indoor, the biggest space to open, need to set expansion joints. Column support is divided according to its position. The purpose of a single plants internal force combination is. There are two kinds of steel reinforced concrete single floor workshop. The method of internal force calculation under arbitrary load. There are two types of beef leg in the workshop. Second, the question: The single floor workshop has the pureness and stiffness of the purlin system. () The single-layer factory has no purlin system and the roof integrity and stiffness are good. () The structure of steel reinforced concrete is arranged in a single layer, except on the basis of foundation, all the components are prefabricated. () The horizontal and vertical frames must be calculated when the structure is calculated. () The leg of the cow leg of the single-layer industrial workshop mainly happens to be inclined to destroy. () The shearing force distribution method can be calculated by the method of shearing force at any time. () The shear force distribution method can be calculated by using the shear force method under any load. () The combination of the internal forces of the frame is carried out in any case. () The wind load is left to the left and the right wind, both at the same time. () The maximum number of cranes for a single, single, single-span plant is two. () Choice: The principle of support arrangement in the vertical column of the structure temperature section of the crane workshop is the correct approach to the following (). Under A brace layout in the middle, on both ends of the brace layout in t