南京中圣园套筒窑与弗卡斯窑对比(国外英文资料).docVIP

南京中圣园套筒窑与弗卡斯窑对比(国外英文资料) In nanjing, the jiayuan kiln is compared to the frokas The development history of sleeve kiln The circular sleeve Kiln was invented in 1964 by bkenbach in Germany: Annular Shaft kil-ask, so the bakken ring sleeve is known as BASK. In the 1980s, bakken Bach was at its peak. In the 1990s, the bakken company was in bad business and decaying. The chief technologist at bekenbach, svap, set up a German company, svapp, to move into the technology and business of the ring kiln. At the same time, swahili, has carried on the technological innovation to circular sleeve kiln, kiln lining brick type structure and material, in particular, this time, the circular sleeve kiln get all-round development. In 2000, there was a serious problem in the business of bekenbach, which had to be auctioned, and the Italian company eventually acquired the bakken. Fokkas acquired the engineering materials and effective patent technology of the baykenbach company, but the patent for the socket was out of date. In 2002, nanjing ShengYuan mechanical and electrical equipment co., LTD., with Germany wapusk lime engineering company established a comprehensive technical cooperation relationship, swahili is Germanys lime engineering companys representative office in China. In 2005, nanjing ShengYuan mechanical and electrical equipment co., LTD., with Germany wapusk lime engineering company established a strategic cooperative partnership, full of sleeve kiln in China market. After several years of development, nanjing ShengYuan mechanical and electrical equipment co., LTD. In some shortcomings on the optimization of the original system, has the ability to design and construction and has a set of sleeve kiln many patent technology. In 2009, nanjing ShengYuan is national standard committee to determine the drafting of sleeve kiln recommended national standards, at the same time, we develop our own 150 TPD and 800 TPD sleeve kiln, on the overall technology of sleeve kiln is in the int