机顶盒机械测试项目(国外英文资料).docVIP

机顶盒机械测试项目(国外英文资料) Set-top box mechanical test plan External public Cooperative set-top box mechanical test plan 1 overview Digital home this specification specified by cooperation of set-top box product reliability test test project and test specifications, the set-top box products to digital home cooperation provides the basis for the reliability of the test. Adopt the standard and test item list 2.1 basic attribute testing The serial number A pilot project one Alternating hot and humid 2 High and low temperature storage 3 Silk-seal solvent testing 4 Screen printing wear-resisting 6 Hand sweat resistance test 7 Detergent test 8 RCA tape wear-resisting test 9 Surface coating test 10 Coating resistance testing 11 Test the adhesion of the coating 12 Immersion test (for surface UV transfer products) 13 High temperature aging 14 Cosmetic test 2.2 device running the test The serial number A pilot project one Switch/button durable test 2 Connector insertion test 3 Connector insertion force test 4 Connector strength test 5 Wire rope tensile test Specific test operation 3.1 basic attribute tests Heat and humidity test Test no. : r5-12 csyl-002-006 Test item: alternating wet heat Test purpose: to verify that the equipment meets the requirements of corrosion resistance under the influence of alternating wet heat Test evidence: IEC 68-2-30, GB/T 2423.4 The testing process: In the following image, the temperature of the humid heat was followed by 6 cycles (6 days) for indoor and indoor products. Checkpoints, required requirements, indicators and expected results: The surface coating of the equipment should be free of peeling, cracking and separating Non-metallic structures should not be discolored, cracking, deforming, degumming, etc The inside and outside of equipment shall be no visible corrosion situation, such as red or white rust corrosion products or other forms of corrosion, including stress corrosion, fracture and scar, etc All mechanical properties of the equipment, su