大工13春《钢结构》功课谜底3(国外英文资料).doc

大工13春《钢结构》作业答案3(国外英文资料) One, single topic (total five questions, total 30 points). 1. The design of the steel structure real abdominal pressure bending member should be calculated as (). A. The overall stability, local stability and deformation of the plane within the plane B. The overall stability, local stability, deformation, and length of the plane The overall stability, local stability and deformation of the plane and outside of the plane D. The overall stability, local stability, and length of the surface of the plane The correct answer: D out of six 2. Biaxial symmetry welded i-section one-way bending member, if bending moments in the strong axis plane and make the component bends around the weak axis, then this component possible overall buckling form is (). The bending of the plane torsion The bending of the surface of the plane The curved buckling of the plane or the bending of the plane The correct answer: 6 points 3. In the steel structure, the lower string of the roof of the roof is supported by the vertical horizontal support of the frame. Vertical bar Next string C. Lower chord D. The correct answer: 6 points 4. The frame spacing in the purlin design is usually taken (). A. 2-4 m 4-6 m B. 6-8 m C. D. 8 to 10 m The correct answer: B out of six 5. The pressure bar of the trapezoidal steel roof frame shall be required to meet the requirements of the selected section. A. such as stiffness B. strength such as C. such as stable D The correct answer: 6 points Two, multiple-choice (18 points in total). 1. The roof support is divided into (). The horizontal horizontal support of the upper string B. the horizontal horizontal support of the lower string C. lower string longitudinal level support Vertical support E. tie bar A, B, C, D 2. When determining the length of the calculation outside the frame column, the following () statement is false. A. take the distance between the sides of the side of the side B. the connection between the beam and the column The s