准确肯定框架—剪力墙结构中各分部结构的抗震等级(国外英文资料).doc

准确确定框架—剪力墙结构中各分部结构的抗震等级(国外英文资料) Framework-shear wall structure is a common form of architectural engineering. Frame - shear wall structure of frame and shear wall of earthquake overturning moment and the total structure seismic overturning moment ratio is to determine the important basis of frame and shear wall seismic grade. To this, the code for seismic design of buildings GB50011-2001 article also 6.1.3 and JGJ3-2002 technical specification for concrete structures of tall building 8.1.3 article made specific provision, how to understand the standard clauses spirit, accurately determine the seismic grade of frame and shear wall, to ensure the quality of the design of the reinforced concrete frame shear wall structure, the structure design is often deal with the problem. Here are some of my personal insights. GB50011-2001 specification also 6.1.3 rule: frame - shear wall structure, under the influence of the basic mode, if the earthquake overturning part under the framework of greater than 50% of the total seismic overturning structure, the frame part of the seismic grade is determined according to the frame structure, and the biggest apply appropriately increased highly comparable frame structure. JGJ3-2002 article 8.1.3 norms, seismic design of frame - shear wall structure, the basic mode under the action of earthquake, earthquake overturning part under the framework of greater than 50% of the total seismic overturning moment when structure, the frame part of the seismic grade should be used according to the frame structure; its maximum height and apply appropriate ratio than frame structure increase. The spirit of the two is consistent. According to the spirit of the above provisions, reinforced concrete frame - shear wall structure design, the first part should be based on frame under earthquake overturning moment what percentage of total seismic overturning moment, determine the respective frame shear wall seismic grade. Often, first trial in accordance with