工程决算注意事项(国外英文资料).docVIP

工程决算注意事项(国外英文资料) Matters concerning project determination ? Engineering verification. The engineering quantity is the basic basis of the final calculation, but to accurately calculate and verify the engineering quantity of each branch, the first must be familiar with the construction drawing. ?? The actual situation of the construction site must be clear. In construction process, often can have some influence project final accounts, such as the change of geological data, the environment of the obstacle, the construction way of changing, drawing in the design of error and error correction, and party a proposed change, etc. As a construction unit, it is usually the time to drill down to the site, master the actual construction and do the visa work. To make the correct adjustment according to the relevant provisions of the contract in case of the change project and the knowledge of the project. ?? In the final audit, the work content of each part of the budget quota must be familiar, in case the calculation is repeated. As in earthwork, mechanical digging earthwork project, including the bulldozers earth-moving, some units at closing, are often applied mechanical digging earthwork calculation again, calculate the bulldozers earth-moving again, such phenomenon in the final examination, to seek truth from facts to get rid of double-counting. ?? There are a number of computational rules that must be understood in all parts of the budget quota, such as flat ground, trench geosyncline and foundation pit. What is the calculation of single row scaffolding, double row scaffolding and manchu scaffolding, and which projects do not calculate the cost of scaffolding? The steel bar loss, the hook, the lap, etc. There are also some rules to deduct from the rules of calculation, such as those that should be deducted from the wall. At the same time, there are some rules that should be added to the quota. Like these items, party b in the preparation of final accounts, often neglect, s