浮雕做图简要步调(国外英文资料).docVIP

浮雕做图简要步骤(国外英文资料) The relief is a brief step Trace lines, draw lines or import picture lines in the selection tool File, input, dot matrix image, file type: JPEG, find the location of the image, select, click open Select the image, look to the right, and lock to the selected object Draw lines and lines, in the draw menu, draw the multiline, see the right side of the sample curve, according to the image line The transformation of the graph line to the required size, the box will select all the lines, the transformation, the reduction, the ratio of the input to the input, the usual size and the determination Two, do the relief sculpture, enter the virtual sculpture modelling to do the diagram Enter the virtual sculpture, first select all the lines, and then execute the new model command under the model menu; Step 2: the smaller the step, the more subtle the picture is, but the slower the picture is. Adjust the margin of the boundary by default 2, which should not be used. determine Fill in the color, (single line filling, seed filling), when filling in, be careful to cut some lines to ensure the uniformity of color. Press, (height, color template: invalid, inside, outside), be sure Go and adjust the brush shape shortcut Q: shallow W: deep A: reduce S: enlarge D: sharp F: slow These are the most commonly used processes for embossing, but there are also a lot of shortcuts and techniques that you can use in the actual drawing. Third, generate the processing path file (1) a black and white image (bitmap *.bmp) process (in 1027) the model goes to the preservation of the sculptural model. Open 5.18, go directly to the 2-d (virtual sculpture tool), model, load sculptural model, find the file you just saved, select and open; Repoint the model, save as bitmap, name, save, and see the navigation bar on the right side of the screen. (bitmap *.bmp) before the ArtCAM software is returned to the relief and make the path before the path is made: Double-click the desktop ArtCAM icon