第18章 轴承习题2谜底(国外英文资料).docVIP

第18章 轴承习题2答案(国外英文资料) Chapter 18 rolling bearings (second assignment) The straight gear shaft is supported by a pair of conical roller bearings, bearing radial force Fr1 Fr2, and the shaft of the bearing is the axial force B. A.F a1 = Fa2 = 0 B.F a1 = Fa2? Zero C.F a2 b0 Fa1 D.F a2 Fa1 2. There are a) 7230 C 36230 (old) and b) 36230 ac 46230 (old) two kinds of rolling bearing, in the role of the same size of the radial load Fr, their internal axial force (derived axial force) the FSa compared with the FSb, should be C. The financial services of the United States and the United States 3. Have a corner contact ball bearing data is as follows: e = 0.7, Fa/Fr e, X = 0.41, Y = 0.85, known by the radial load bearing Fr = 2100 N, axial load Fa = 1480 N, the equivalent dynamic load P as B N (fP = 1.2). A. 252 b. c..2542.8 The additional axial force generated inside the rolling bearing is caused by B. The additional axial force should be taken into account when calculating the axial load for the E and F bearings. There are contact angles on the structure of the bearing. C. the axial force is too large; It can withstand the axial load bearing; Angle contact bearing; F. Cone roller bearings. A pair of 7210B bearing is shown, bearing radial load Fr1 = 8000N, Fr2 = 5200N, and axial load Fa. Try to find the attached axial force S and axial load Fa1 and Fa2 for each bearing. (1) the Fa = 4000; (2) Fa = 1000; (3) Fa = 0 By the 7210 b, look-up table a = 40 ° C = 28200 n C0 = 22800 Calculating bearing added shaft to force S 7210B S = 1.14 Fr The axial force S S1 = 1.14 Fr1 = 9120N S2 = 1.14 Fr2 = 5928 n Calculate the axial load of the bearing When Fa = 4000, S2 + Fa = 5928 + 4000 = 9928 S1 1 is the tight end, and 2 is the loose end Fa1 = S2 + Fa = 5928 + 4000 = 9928N Fa2 = S2 = 5928N loose ends When Fa = 1000, S2 + Fa = 5928 + 1000 = 6928 S1: S1 2 is the tight end, 1 is the loose end Fa1 = S1 = 9120N loose ends Fa2 = S1 - Fa = 9120-1000 = 8120N When Fa = 0, S2 + Fa = 5928 + 0 =