耐火浇注料的施工和应用(国外英文资料).docVIP

耐火浇注料的施工和使用(国外英文资料) Construction and use of refractories Refractory castable, introduced in the both parts use the quality of the material, and its design and construction are more successful, preheater system used refractory castable has not changed for the most part, other parts of the cycle are mostly ideal through the construction of the first production line, the company has developed a technology high furnace building construction team, not only for jidong group, also for the domestic cement plants and a number of furnace building has made a contribution. After years of digestion, now operating normally, design construction and use of refractory castable, obtained some experience, also has a lot to learn from the lessons of the use of refractory castable on cement kiln refractory castable used meter, the highest frequency of thermal shock because of its position in kiln, each stop kiln, born the brunt of the cold and hot shock is kiln mouth castable and every time after a long time stop kiln, from ignition to release before, although the wicket castable by flame thermal radiation gradually rise be like, but because of the flame is in the direction of preheater, so the temperature of the castable at that point temperature is much lower than after feeding, and uneven, so when clinker after reaching after feeding, direct contact with the castable, temperature rise in a short period of time want to known, thus castable burst or wear a high probability of internal crack of clinker. Kiln because here is not very stable, and some few kiln kiln, therefore from the calcining zone of meters has set the degree of the clinker cooling hardening particles from here fell into the cooling machine, thus causing serious wear of castable. In addition to the good corrosion of low melting phase, such as alkali salt soot fume, the pouring material is affected by multiple effects and is easily damaged. The winter time is relatively long, and because of the need of the market. Kiln