华中数控(国外英文资料).docVIP

华中数控(国外英文资料) The G code command code group and its meaning Modal code and normal code The function of form code will continue to be maintained after it is executed, while general code It only works when the command is received. The code that defines movement is usually modal code, Like a straight line, arc, and loop code. Conversely, the return code like the origin is called general code. Each code belongs to its own code group. In modal code, the current code is replaced by the same group of code that is loaded. The code group and its meaning Modal code and normal code The functionality of the form code will continue to be maintained after it is executed, whereas general code only works when the command is received. The code that defines movement is typically modal code, like a straight line, an arc, and a loop code. Conversely, the return code like the origin is called general code. Each code belongs to its own code group. In modal code, the current code is replaced by the same group of code that is loaded. G code interpretation G00 location (rapid movement) G01 linear cutting G02 clockwise arc (CW, clockwise) G03 counterclockwise arc (CCW, inverse clock) (Dwell) G09 stops at precise locations The G20 English input G21 metric input G22 internal travel limit is valid The G23 internal travel limit is invalid G27 checks the reference point to return The G28 reference points are returned G29 returns from the reference point G30 goes back to the second reference point G32 thread cutting transfering G36 diameter programming G37 radius of programming The G40 cancels the tip radius G41 tip radius offset (left) G42 tip radius offset (right) G53 direct machine tool system programming G54 - G59 coordinate system selection The inside of the G71 is a rough cut cycle The G72 steps have a rough cut cycle The G73 closed loop cycle The G76 threading cycle The G80 inner diameter cutting cycle The G81 face turning fixed cycle G82 thread cutting and fixing cycle G90 absolute programm