auotoCAD另一版本的教案(国外英文资料).docVIP

auotoCAD另一版本的教案(国外英文资料) One. AUTOCAD operating basis Set up the toolbar Standards, features, drawings, modifications, capture, annotations Set the resolution of WINDOWS, 1024X768 System setup: Tools - , - cross - 100. Tools - - - - the tradition starts the dialog. Tools - - user system configuration - cancellation: acceleration key, shortcut menu. Start the dialog: (1) use templates: template file extensions: DWT Abbreviations: ACAD tools System standard template: ACADISO. DWT ANSI *. DWT: American standard DIN *. DWT: German standard GB *. DWT: national standard ISO *. DWT: world standard JIS *.dwt: Japanese standard (2) use the wizard: Advanced wizard, quick wizard Quick wizard: just set the scope of the drawing. Coordinate systems and coordinates Coordinate system: the WCS (world coordinate system, there is only one, fixed), UCS (user coordinate system, any setting, unlimited number, bearing and position can be set by the user) Coordinates: XY rectangular coordinates, polar coordinates Relative coordinates and absolute coordinates X, Y, @x, Y (relative to the XY coordinates, relative to the previous point), R T, @ R T (relative polar coordinates) Program drawing and interaction drawing Interactive drawing: using the mouse, keyboard, interactive drawing: operation Program drawing: AUTOLISP table processing language, OBJECT ARX C + + / C For example, the 3D modeling software MDT, which is a 3D design software in AUTOCAD platform,Secondary development. Mouse keyboard use: (1) any keyboard input must end with the enter key!!! (2) return key = space key (3) in the input state, right-click = enter key (4) in the drawing state, the left key indicates the selection, selecting the object and so on (5) in the drawing state, right-click (after the Settings) : repeat or finish the operation Two, basic drawing Content summary: Drawing: basic drawing, extension drawing Editor: basic editing, extension editing Basic drawing and basic editing: General principles: a c