如何理解与实施设计和开发过程(国外英文资料).docVIP

如何理解与实施设计和开发过程(国外英文资料) In the case of the engineering survey, the 1994 standard 4.4 elements design control is a difficult task for the organization. Due to geotechnical engineering design has a simple design content, compared with the upper structure design cycle is short, usually no internal interface (also not complex have internal interface interface), and in when signing a contract, and rarely in terms of the contract involves design content. Under the sign on the particularity of geotechnical engineering design, engineering survey organizations in the implementation of GB/T 19001-2000 standard design and development process of 7.3 deal with the problem how to design and development control program. Scope of geotechnical engineering design and development control (1) the treatment of the foundation; (2) foundation pit support and slope support; (3) engineering precipitation. The difference between the 2000 standard and the 94 standard (1) the standard 4.4.1 standard of standard 4.4.1 requires that the supplier should establish and maintain the procedures for the design and control and validation of the product design. The 2000 standard does not require the requirement to plan and control the design and development of the product. (2) the 2000 standard 7.3.1 design and development plan is a combination of the 1994 standard 4.4.2 design and development plan and the 4.4.3 organization and technical interface. The standard of version 94 requires that the interface information be formed and reviewed regularly. The 2000 standard only requires that the interface be managed. The way of management can be determined by the organization itself. The purpose is to be able to meet the responsibilities and communicate effectively with the interface information. (3) the design input required by the standard 4.4.4 of the standard 4.4.4 is required to form a document to consider the outcome of the contract review activities. The 2000 standard 7.3.2 design and development input s