集团公司四熟悉共性复习题(国外英文资料).docVIP

集团公司四熟悉共性复习题(国外英文资料) The group company four familiar common complex problem Where should the underground pole be installed? Answer: (1) the production area substation; (2) the adit chamber with the electric equipment and the high-voltage electrical equipment installed separately; (3) low-voltage distribution points or places with more than three electrical equipment; (4) no low-voltage distribution point of coal transportation lane (machine) working face, return air lane, concentrated transportation lane, and by the separate power supply substation, tunneling faces should be set at least one local grounding; (5) metal connection devices connected to high-voltage power cables. What are the requirements for transformer parallel operation? Answer: (1) variable pressure ratio is the same, it allows error no more than plus or minus 0.5%; (2) the short circuit voltage (impedance) is the same, allowing the error to not exceed plus or minus 10%. (3) the wiring of the transformer is the same; (4) when two transformers are running in parallel, the capacity ratio should not exceed 3 to 1. Coal mine safety regulations stipulates which protective devices should be installed in the cylinder driven belt conveyer, which is installed in the main transport lanes of the incline. Must furnish anti-skid protection, coal pile driving drum protection, prevent run partial protection, temperature protection device, smoke, tension fall protection, laceration resistant protection and automatic sprinklers. The gear should be equipped with anti-anti-stop device and brake device when carrying. Prohibited, issued by the state administration of work safety in the third batch of coal mining is the use of equipment and process directory eliminated motor, elevator, feeder switch, air compressor and improve the mechanical and electrical control device is series (specifications, type)? The main motor is the YB series of triple-phase asynchronous motor (63-355mm, voltage 660v and below). The switch for