3dmax用光域网使用经验(国外英文资料).docVIP

3dmax用光域网使用经验(国外英文资料) 3dmax USES experience with field network -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3dmax USES experience SkyLight (sky light) SkyLight is used to simulate daylight. The user can set the color of the sky or assign a map to it · On: to turn On or off the lights. Select the check box to illuminate the scene using sky lights in shadow and render computation. · Multiplier: amplifying or reducing the intensity of the light by specifying a positive or negative value. Sky Color options group · Use Scene Environment: select this option to set the color of the light using Environment Settings in the Environment and Effect dialog. This setting is only valid when the light trace is in the active state. · Sky Color: select the option to display the Color Selector dialog box by clicking the Color sample box to select the Color of the Sky lamp. · Map: use stickers to influence the color of sky lights. Check boxes to control whether the map is activated; The fine-tuning device on the right is used to set the percentage of the map (if the value is less than 100%, the color will be mixed with the sky); The None button is used to specify a map. The map only works when the light tracking is active. Render (Render) option group Note: this option is available only when the default scan line renderer is currently used and the light trace is not activated.? Cast Shadows: when selected, the sky light can Cast Shadows. The default is to close. Note: this option is invalid when using light energy transmission or light tracking. When rendering at the Activeshade rendering level, the sky light does not cast shadows. The Rays per Sample (the number of light per Sample) : set the number of light that is used to calculate the light from the sky at the point in the scene. The default value is