cad绘图自动生成面积方法(国外英文资料).docVIP

cad绘图自动生成面积方法(国外英文资料)The statistical area has three methods:Use the command AA to order each corner of the area in the order of the order. Disadvantages: not intuitive, whether the point of intersection cannot be checked, cannot measure the arc area accurately.Use the command PL to make a closed PL line along the outline of the terrain, select the line, and use the LI command to display information such as circumference, area, and angular coordinates. Disadvantages: requires a higher editing capability for the PL line (for complex curved areas).3, with BO command, bring up the boundary to create dialog box, object types to choose more line, mouse the left key click anywhere in the region, can be generated automatically in accordance with the topographic contour of the enclosed PL line, choose the line, with LI command. Disadvantages: the requirement that the original figure must be closed and not too much, otherwise it wont be successful.Please select the above method according to the actual situation, then sum up all the area of the statistics.CAD calculation area of several methods of AutoCAD, we can conveniently and accurately calculate the two-dimensional closed graph area and perimeter, but for different categories of graphic calculation methods are also different. For simple graphs, such as rectangles and triangles. Only execute the command AREA (it could be a command line, enter or click on the corresponding icon), at the command prompt Specify first corner point or [Object/Add/Subtract] : after the open to capture, in turn, select the rectangle or triangle carriage return after each delivery point, AutoCAD will be automatically calculated AREA (AREA), Perimeter (generating), and the results will be listed in the command line. For simple graphics,A two-dimensional enclosed figure consisting of a circle or other Polyline, Spline. Execute the command AREA, at the command prompt Specify first corner point or [Object/Add/Subtract] : after the selection Object opt