GMP干净车间设计请求(国外英文资料).docVIP

GMP洁净车间设计要求(国外英文资料) GMP clean workshop design requirements With the rapid development of medicine, the food industry, the renewal of the new clean workshop, the workshop must be reformed to meet the modern requirements of clean production. 1, on the surrounding environment clean workshop for the construction of the modern enterprise internal factories and plants need not only to meet the requirements of GMP, with the surrounding environment of the factory to meet the specific requirements, so in front of the factory building construction environmental assessment is necessary. The evaluation area of the factory is in accordance with the requirement of environmental protection. The assessment consists mainly of three aspects: one is the air quality of the region; Second, the evaluation of water resources; In addition, the supply of three roads, water and electricity. The understanding of the evaluation, and put forward the construction area around the fresh air in the atmosphere environment quality condition and the surrounding the construction requirements of air quality, through the air filter to purify the air, no pollution, little dust. Water resources, surface water evaluation, local knowledge of groundwater quality. Tap water production enterprise to use, but in some places there is no water, underground water Wells or water must be taken to the local water conditions should be determined, in order to take into account the water treatment plants. The evaluation of the path, the area around the plant, water and electricity supply. Assessment of impact impact assessment of 1.2, the environmental protection requirement environment more important environmental purification plant construction. The assessment consists of three aspects: air, water, and noise. Impact on air quality evaluation, the manufacturer of toxic or harmful gases or dust emissions, is regarded as meet local standards, but also in the wind cant build in city residential area should be far away fro