vlax-curve函数(国外英文资料).docVIP

vlax-curve函数(国外英文资料) The vlax curve - get family function, including the following functions: Vlax - curve - getPointAtDist Vlax - curve - getPointAtParam; Vlax - curve - getDistAtPoint; Vlax - curve - getDistAtParam; Vlax - curve - getParamAtPoint;; Vlax - curve - getParamAtDist;; Vlax - curve - getStartParam;; Vlax - curve - getendParam;; Vlax - the curve - getStartPoint; Vlax - curve - getEndPoint;; Vlax - curve - getFirstDeriv;; Vlax - curve - getSecondDeriv;; Vlax - curve - getSecondDeriv Etc., when the use of these functions are used to curve parameters, to use these functions well, must want to understand the meanings of the curve parameter, below I will curve parameters in various curve is the meaning of the following: In a straight line, the parameter value is the point in the line from the starting point; The line starting parameter is 0, the end parameter is the length of the line; Param in the arc, garden, and ellipse, the parameter values are the radians of the center to the curve of the curve; The value of the starting parameter is 0, the end parameter is 2pi, the arc starting parameter corresponds to the 50 yard value of the arc DXF, the end parameter corresponds to the 551 value of the arc DXF. Param in polyline, the parameter value is the order in which the computation point is on the polyline vertex, the value integer is the vertex sequence on the polyline, which is the starting point of 0,The decimal part is the ratio of the length to the length of the poly segment. Param is in Spline, which is a line from the Splines fitting point, which indicates the distance from the starting point in the line. The starting parameter value is 0, and the end parameter value is the total length of the line line. Vlax - curve - getFirstDeriv function is to return curve at a specified location of the first derivative (WCS), actually (vlax - curve - getFirstDeriv obj param) function to calculate the value of the is curve in the parameter value of param the tangent