商品房各种面积算法(国外英文资料).docVIP

商品房各种面积算法(国外英文资料) The second floor First, a few formulas:? The floor area is equal to the area of the building area. The square area is equal to the building area times the coefficient of public amortization, right? The coefficient of public amortization = the total floor area of the building. The area of the inside of the cover = the area of the inside area + the area of the wall area + the balcony area? All right, explain the formula above, right? 1, set inside usable floor area, there is a image that is called carpet area, in a nutshell, is to put all your area on the shop carpet, the carpet of what area you can shop, how much is set inside usable floor area. ? 2, set inside wall body area, set inside wall body area including the inside wall separating (according to the projection area of all computing), the separation between the two families wall (calculated according to the half of the projection area), outer wall (calculated according to the half of the projection area) three parts. ? The balcony area, the enclosed balcony is calculated according to the whole area, do not close the balcony is calculated in half area. ? 4, equally Shared area, building floor elevator, fire escape, for we service distribution, water pump and other ancillary facilities of housing, half of the horizontal projection area of the external walls, all these public Shared area calculation. ? Usually in a multi-storey building without an elevator, the public amortization ratio is normal within a range of 5 to 10 percent, and it is possible to exceed 10 percent, although rare. ? In small, elevator buildings, the public amortization is usually between 15 and 20 percent. ? In high-rise buildings with elevators, public amortization is usually between 18 and 25 percent. ? In elevator tower small tall buildings, public amortization is usually between 18 and 22 percent. ? In tall buildings with escalators, public amortization is usually between 20 and 30 percent. ? These Numbers are just empi