接地网的培植(国外英文资料).docVIP

接地网的建设(国外英文资料) Abstract: the paper introduces the common network composition and the influencing factors of ground resistance, ground network construction should be considered in geology, soil conditions and the construction technology, compares the performance of common grounding materials. 1. An overview of the Grounding system is the most difficult in the construction of lightning protection engineering construction is also one of the most important component, the design of the grounding network due to the different environment and there is a big difference. System grounding engineering is mainly composed of grounding body, cable networks, including several factors affecting the grounding effect of soil resistivity, the choice of grounding body. Corrosion of grounding materials and reasonable cloth row grounding network. Choice of earthing material Used different industries, different areas of ground material is different, the highest utilization rate on the market at present the ground material or metal materials, mainly copper plate, Angle steel and flat steel, etc.; But due to the difference in the ground environment and the user requirements, it is different. In some environment and conditions are not suitable for using metal earthing materials such as metal earthing materials in high corrosion of soil corrosion in a short period of time has been losing ground. Different ground material has different characteristics, according to its characteristic combination environment use is ground engineering the problem that should consider before. The type of ground material 2.1.1 metal grounding material From the late 80 s to now occupy the top of the ground material is still the metal grounding material (here mainly refers to copper and steel), due to its good conductivity and economy is one of the most important material in the ground engineering, but because of the metal material corrosion problems, docking the influence of the resistance is bigger, also is a big