氰尿酸对三氯异氰尿酸杀菌性能的影响及对策(国外英文资料).docVIP

氰尿酸对三氯异氰尿酸杀菌性能的影响及对策(国外英文资料) Effect of cyanuric acid on bactericidal performance of trichloro-isocya Nuric acid and its solution Wei Xin, Li Hesheng, Wang Dong (the Research Institute of Beijing Yanshan Petrochemical Co., Ltd., SINOPEC, Beijing 102500, China) The effect and countermeasures of cyanuric acid on the antiseptic properties of triclosan Wei xin, qi and sheng, wang qi (China petroleum and chemical corporation limited, Beijing yanshan branch research institute, Beijing 102500) [abstract] the effect of cyanuric acid on the antiseptic performance of triclosan was studied. The results showed that the optimum concentration of cyanuric acid was 20 ~ 80 Mg/L, once the concentration of cyanuric acid in circulating water reaches 100 mg/L, it will reduce the antiseptic performance of triclosan and produce chlorine lock. Solve the party The method is by adding a certain amount of melamine, which is produced by the reaction of melamine and cyanuric acid in the water, and further by the filtration of the filter to remove the precipitate The concentration of cyanuric acid in circulation to keep it within reasonable concentration. [keyword] cyanuric acid; Trichloro isocyanuric acid; Bactericidal performance [middle image classification] TQ085 + [article number] B [article number] 1005-829x (2009) : 2004-0025-03 Abstract: It has been popular that the effects of cyanuric acid on bactericidal performance of trichloro-isocya Nuric acid (TCCA). A solution to the reduction of cyanuric acid concentration in circulating cooling water is put for - The results indicate that The optimal concentration range of cyanuric acid in water is from 20 to 80 mg/l. Once The concentration reaches 100 mg/L, the bactericidal performance of TCCA will technical analysis, which is called chlorine The lock . The solution is to add an mount of melamine, which can react with The cyanuric acid to form an insoluble salt Precipitate. The resulted precipitate can be removed through The bypass filtration s