焦化技术问答- 除焦(国外英文资料).docVIP

焦化技术问答- 除焦(国外英文资料) Decoking system High pressure water pump What are the parts of the high pressure pump pump? Answer: high pressure pump unit includes: high pressure water pump, growth box (gear box), high voltage motor What are the performance parameters of the high-pressure pump? A: 250m3 / h, 110m3 / h, 2880m, 3780rpm, 71.5%, 100.4m. What is the type of high pressure pump? What is the series for the impeller? Answer: model tdqg250-290 x 10, the impeller series is 10. What is the mechanical seal of high-pressure water pump? How much pressure and flow? Answer: the mechanical seal flushing method is outside rinsing, the washing medium is softening water, the pressure is 0.2 ~ 0.3 Mpa, the amount of water is 2.2 ~ 2.7 m3 / h. What is the gear boxs low speed and high speed? A: the low speed shaft speed is 1492 RPM and the high-speed shaft speed is 3780 RPM. What is the type, rated voltage and rated power of the high pressure pump motor? Answer: the electric motor type is yks710-4, the rated voltage is 6000 V, the rated power is 3300 kw. What type of cooling method is used for high pressure pump motor? Answer: total enclosed water - wind chill. What are the requirements for starting high pressure water pumps? Answer: 1), the main control cabinet is connected to power supply. 2) there is no abnormality in the inspection of the car, and the water for the sealing and the cooling water of the motor. 3) the lubricating oil system is running normally, and the oil pressure and flow are normal. 4) the level of the high water tank is normal. 5) the focal control valve is in reverse flow. 6) finish the tower. 7) the pump allows the start-up to be confirmed. What are the interlocking downtime of the high-pressure pump? Answer: 1), pump suction pressure low jump lock, interlock (stop). 2) the high water can be low and low tripping, interlock (stop). 3) the lubricating oil pressure is low, delay 0.5 second, interlock (stop). Low and low level of high water tank, interlock (stop).