50MHZ 硅振荡器(SiT8103).pdf

SiT8103 High Performance Programmable Oscillator 1 - 110 MHz Features, Benefits and Applications • 1-110 MHz frequency range. • High frequency stability of ±20PPM, ±25 PPM, ±30 PPM, ±50 PPM • Typical RMS period jitter of 4 ps • Typical low current consumption of 8 mA in active mode • Programmable standby or output enable modes • Available in four industry standard packages: 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm • All-silicon device with outstanding reliability of 2 FIT, 10x improvement over quartz-based devices, enhancing system MTBF • Outstanding mechanical robustness for portable applications • Ultra short lead time • Ideal for consumer electronics, video, graphics card, set top boxes, HDTV, DVR, scanners, printers, copiers, IP camera, etc. • Ideal for high-speed serial protocols such as: USB 1.1, USB 2.0, SATA, SAS, Fibre Channel, Firewire, Ethernet, PCI Express, etc Specifications Parameter Symbol Min. Typ. Max. Unit Condition Output Frequency Range f 1 – 110 MHz Frequency Stability F_stab -20 – +20 PPM Inclusive of: Initial stability, operating temperature, rated power, -25 – +25 PPM supply voltage change, load change, shock and vibration. -30 – +30 PPM ±20 PPM is avaiable for extended commercial temperature only. -50 – +50 PPM Aging Ag –1.0 – 1.0