USB 2.0测试.pdfVIP

USB 2.0 Pre-Compliance Physical Layer Testing 1 Brief Introduction to USB 2.0 Four wire system (D+, D-, VBUS, GND) USB2.0 provides the following speed selections Data Rate Rise Time Low Speed 1.5 Mbps 75 to 300 ns Full Speed 12 Mbps 4 – 20 ns High Speed 480 Mbps 500 ps Self powered and Bus powered devices VBUS supplies power to devices that driver their primary power from the host or hub. The USB-IF has instituted a certification and marking program – Persuade developers to fully test their USB devices. – New USB trademark logo that indicates a device is certified and conforms to all applicable USB 2.0 specifications. 2 4 Three categories of Compliance testing 0 Physical layer (Electrical Test) 0 Protocol layer 0 Interoperability testing 0 USB 2.0 legacy tests 0 Signal Quality Test 0 Droop Drop Test Inrush Current Test 0 0 HS Specific Tests 0 Chirp Test Monotonic Test 0 0 Receiver sensitivity Test 0 Impedance Test (TDR) 3 4 500 MHz PC with Windows 2000 (English) or XP OS High-Speed Host Controller USB-IF furnished Test Mode Software Good quality USB cables Good quality USB Hub – 1.1 – Belkin F5U100 / F5U101 – 2.0 – Belkin F5u221 / IOGer GUH-204 ‘Gold’ ATEN UH-204 ‘Gold’ Mouse (any listed on USB-IF mouse) 5 测试项 1.