DHT11温湿度测量,液晶及串口显示.docVIP

DHT11温湿度测量,液晶及串口显示 #include reg51.h #include intrins.h // typedef unsigned char U8; /* defined for unsigned 8-bits integer variable 无符号8位整型变量 */ typedef signed char S8; /* defined for signed 8-bits integer variable 有符号8位整型变量 */ typedef unsigned int U16; /* defined for unsigned 16-bits integer variable 无符号16位整型变量 */ typedef signed int S16; /* defined for signed 16-bits integer variable 有符号16位整型变量 */ typedef unsigned long U32; /* defined for unsigned 32-bits integer variable 无符号32位整型变量 */ typedef signed long S32; /* defined for signed 32-bits integer variable 有符号32位整型变量 */ typedef float F32; /* single precision floating point variable (32bits) 单精度浮点数（32位长度） */ typedef double F64; /* double precision floating point variable (64bits) 双精度浮点数（64位长度） */ // #define uchar unsigned char #define uint unsigned int #define Data_0_time 4 //----------------------------------------------// //----------------IO口定义区--------------------// //----------------------------------------------// sbit TH = P3^7 ; sbit WELA=P2^7; sbit RS= P3^5; /*定义LCD控制端口*/ sbit RW= P3^6; sbit LCDEN = P3^4; #define LCDDATA P0 //----------------------------------------------// //----------------定义区--------------------// //----------------------------------------------// U8 U8FLAG,k; U8 U8count,U8temp; U8 U8T_data_H,U8T_data_L,U8RH_data_H,U8RH_data_L,U8checkdata; U8 U8T_data_H_temp,U8T_data_L_temp,U8RH_data_H_temp,U8RH_data_L_temp,U8checkdata_temp; U8 U8comdata; U8 outdata[5]; //定义发送的字节数 U8 indata[5]; U8 count, count_r=0; U8 str[5]={RS232}; U16 U16temp1,U16temp2; void delayms(uchar ms) /*LCD1602 延时*/ { uchar j; while(ms--) { for(j=0;j250;j++) {;} } } void lcd_busy_wait() /*LCD1602 忙等待*/ { RS = 0; RW = 1; LCDEN = 1; LCDDATA= 0xff; while (LCDDATA0x80); LCDEN= 0; } void writecommand(uchar command) /*LCD1602 命令字写入*/ { lcd_busy